[Offer to Sell]

AHG992010 Manual Call Point

AHG992010 call point is specially designed for the AHGBUS circular loop technology, adopt SMT techniques, and occupy one address point of the bus. In the event of a fire, press the button and the alarm indicator lamp is on for alarming. The AHG9600 fire alarm panel can accurately indicate the address of the alarm button.
A dry contact signal input designed in the button can connect with the feedback signals from the button starting pump of the hydrant. At the same time a phone jack is provided for convenient contact with the Fire Service Center.
Functional Features:
Built-in microcontroller;
Low power design and the standby current is not over 80μA;
Built-in bar code and automatic identifying and addressing software;
Saving installation time and manual work due to none manual setting such as electronic addressing;
Broadcast interactive communications and strong anti-electromagnetic interference;
Adopting recoverable structural design and resetting through a dedicated instrument for the sucker;
Making an automatic test on its operation through its perfect self-diagnostic function.
Technical data
Moudle : J-SA-P-M-AHG992010
Standard : GB19880-2005 GB/T19001-2000
Operating Voltage : DC19V
Quiescent current : ≤45μA
Alarm Current : ≤460μA
Ambient Temperature : -10℃~55℃
Relative Humidity : ≤95%RH
Alarm display : Φ5 LED
Weight : 120g
Dimensions : 110mm —110mm —37mm

---