[Offer to Sell]

Belt Tension Meter

Model: BTT-2880
Application: The measuring head is placed on the belt and the clamp is tightened using the clamping knob. This deflects
the belt through a known angle defined by the anvil and the fixed pillars. A load cell attached to the clamp measures the
force required to deflect the belt. which is proportional to the tension in the belt. The output voltage from the load cell is
digitized and scaled to give the correct tension reading on the instruments display.
Operation:
Display: 4 digits, 10 mm LCD with colored coded LED indication of Low , Ok and Hi.
Measurement range:
0-750 Newtons
0-120 Pounds
0-77 Kilograms
0-114 Seems
Belt width: Up to 36mm
Overload alarm: 750 Newtons
Maximum load: 850 Newtons
Resolution: +-1 Newtons or 1 least signinficant digit of other units
Accurancy: +-5% of full-scale
PC interface: RS232C interface
Audible warning: Piezoelectric sounder
Power supply: 4*1.5V AAA size batteries
Dimensions: 135*62*33mm or 5.3*2.4*1.3inch
Weight : 335g( not including batteries)
Standard accessories included:
Measuring head............1 pc
Carrying case.................1pc
Operation manual...........1pcs
Optional accessory: Cable and software for RS232C and USB

---